Page 1 of 1
I NEED A "JUNKER" BOLT ASSEMBLY FOR A DEMILLED M/N RIFLE BEING USED AS A STAGE PROP
Posted: Sat Sep 18, 2021 3:19 pm
by NEILSAKE1001
AS PER THE SUBJECT: I NEED AN OLD -- AND INEXPENSIVE AS POSSIBLE -- BOLT ASSEMBLY FOR A DEMILLED M/N BEING USED AS A STAGE PROP.
ANYONE HAVE ANY CANDIDATES IN THEIR JUNK DRAWER?
IT SEEMS SILLY, AND TOO EXPENSIVE, TO USED A "WORKING" BOLT ASSEMBLY INTO THE RIFLE, WHICH IS A REAL JUNKER EVEN WITHOUT THE DEMILLING.
THANKS FOR ANY HELP.
NEIL GIELEGHEM
NEIL@NGATTORNEY.COM
LOS ANGELES, CA
Re: I NEED A "JUNKER" BOLT ASSEMBLY FOR A DEMILLED M/N RIFLE BEING USED AS A STAGE PROP
Posted: Sat Sep 18, 2021 3:37 pm
by steelbuttplate
NEILSAKE1001 wrote: ↑Sat Sep 18, 2021 3:19 pm
AS PER THE SUBJECT: I NEED AN OLD -- AND INEXPENSIVE AS POSSIBLE -- BOLT ASSEMBLY FOR A DEMILLED M/N BEING USED AS A STAGE PROP.
ANYONE HAVE ANY CANDIDATES IN THEIR JUNK DRAWER?
IT SEEMS SILLY, AND TOO EXPENSIVE, TO USED A "WORKING" BOLT ASSEMBLY INTO THE RIFLE, WHICH IS A REAL JUNKER EVEN WITHOUT THE DEMILLING.
THANKS FOR ANY HELP.
NEIL GIELEGHEM
NEIL@NGATTORNEY.COM
LOS ANGELES, CA
I think I have a no good bolt head if you can find a body. I think Liberty Tree (top of this page)
or Buymilsurp might have bolt body.
Re: I NEED A "JUNKER" BOLT ASSEMBLY FOR A DEMILLED M/N RIFLE BEING USED AS A STAGE PROP
Posted: Sun Sep 19, 2021 7:28 am
by qz2026
I've got a bolt body
Re: I NEED A "JUNKER" BOLT ASSEMBLY FOR A DEMILLED M/N RIFLE BEING USED AS A STAGE PROP
Posted: Sun Sep 19, 2021 4:44 pm
by NEILSAKE1001
Gentlemen:
Thanks for the responses to my inquiry.
As to each of you: (1) how much would you want (including shipping); and (2) how can we get this deal done, e.g., PayPal; email me at the address below?
[I repeat that the bolt assembly is for a non-firing stage prop. So functionality, or appearance, are not an issue.]
Thanks again.
Neil Gieleghem
neil@ngattorney.com
310 678 4563
Re: I NEED A "JUNKER" BOLT ASSEMBLY FOR A DEMILLED M/N RIFLE BEING USED AS A STAGE PROP
Posted: Thu Aug 04, 2022 10:12 am
by steelbuttplate
PM me your address, I'll send the bolt head and you can send me a check for $10.