The Russian Mosin Nagant Forum

Posted: **Thu Sep 23, 2021 10:18 am**

Hey everyone!

I have a question about the reticle in a scope on a Mosin sniper I am looking at. It is a Tulsky import and after doing reading here it looks authentic.

On to my question, the reticle is centered in the scope for windage but not for elevation. The reticle is about 2/3 of the way up in elevation. The rifle is shooting at 200 yards to point of aim.

Anything I could do to center the reticle or is it okay and I’m just being too picky?

Posted: **Thu Sep 23, 2021 12:04 pm**

AMG2244 wrote: ↑Thu Sep 23, 2021 10:18 am Hey everyone!

I have a question about the reticle in a scope on a Mosin sniper I am looking at. It is a Tulsky import and after doing reading here it looks authentic.

On to my question, the reticle is centered in the scope for windage but not for elevation. The reticle is about 2/3 of the way up in elevation. The rifle is shooting at 200 yards to point of aim.

Anything I could do to center the reticle or is it okay and I’m just being too picky?

I'm not sure if where yours is sitting is correct or not but it does sound like the elevation is a bit high. There's an adjustment for this. I have two PUs and haven't had to fool with it. If you look here and down the page Ratnik aka Alex goes over the adjustment procedure. https://www.gunboards.com/threads/pu-sc ... de.277211/

Posted: **Mon Sep 27, 2021 9:19 am**

It is not supposed to be in center. If scope is installed properly, reticle should centered at 900 meters distance setting

The Russian Mosin Nagant Forum

Russian PU scope.

Russian PU scope.

Re: Russian PU scope.

Re: Russian PU scope.