M27 stock

NEW! If it won't quite fit elsewhere, maybe it will fit here!!!!
Strictly at the mercy of the Administrators (could be moved)
Post Reply
Robertroadking
Posts: 94
Joined: Thu Dec 13, 2018 5:43 pm

M27 stock

Post by Robertroadking »

I have not seen this hole in a mosin stock before, but this is my first Finnish
You do not have the required permissions to view the files attached to this post.
User avatar
Longcolt44
Administrator
Administrator
Posts: 7574
Joined: Thu Aug 25, 2011 4:13 pm
Location: Loveland, Ohio
Contact:

Re: M27 stock

Post by Longcolt44 »

That's it? That's all we get to see? Need to see side views of the butt stock at a minimum. None of my M27s have that hole.
FREEDOM...USE IT OR LOSE IT!!
Robertroadking
Posts: 94
Joined: Thu Dec 13, 2018 5:43 pm

Re: M27 stock

Post by Robertroadking »

604E494C-80E3-48B1-934A-EF731B95F2E1.jpeg
F1D45140-B531-4CDD-8931-647C11404D9F.jpeg
604E494C-80E3-48B1-934A-EF731B95F2E1.jpeg
C5A0854A-9E72-425F-A3E9-9CBF89AF2197.jpeg
B1EDC05A-B946-4D3E-897D-98B2EB3834C2.jpeg
You do not have the required permissions to view the files attached to this post.
Robertroadking
Posts: 94
Joined: Thu Dec 13, 2018 5:43 pm

Re: M27 stock

Post by Robertroadking »

The hole is about an inch deep
User avatar
steelbuttplate
Posts: 3938
Joined: Sat Nov 02, 2013 2:24 pm
Location: Foxhole in the Smoky Mtns. N.C.

Re: M27 stock

Post by steelbuttplate »

Robertroadking wrote:The hole is about an inch deep
Isn't that the "butt hole" ? :lol:
" There are two kinds of people, the good people and the ones that aggravate the hell out of the good people"
Robertroadking
Posts: 94
Joined: Thu Dec 13, 2018 5:43 pm

Re: M27 stock

Post by Robertroadking »

Oh Jeeeze! I thought that black stuff was cosmoline.
User avatar
Lotema
Posts: 1565
Joined: Tue Jun 11, 2013 7:15 pm
Location: Western Washington

Re: M27 stock

Post by Lotema »

I thought I had read somewhere that they would take plugs from that area to address cracks in stocks etc. I could be wrong though.
Lotema
Argue for your limitations, and sure enough they're yours. -- Richard Bach
capt14k
Posts: 1324
Joined: Sat Jun 27, 2015 8:06 pm
Location: NJ

Re: M27 stock

Post by capt14k »

Robertroadking wrote:Oh Jeeeze! I thought that black stuff was cosmoline.
Not cosmoline on Finns. More like graphite grease. First time you take a stock apart and grab the barrel you won't do it again. Gets everywhere. As for hole yes I believe that is where plugs were taken from for expedient repairs.


Sent from my iPad using Tapatalk
Robertroadking
Posts: 94
Joined: Thu Dec 13, 2018 5:43 pm

Re: M27 stock

Post by Robertroadking »

Mechanically I can’t figure how you could cut a plug from there, if you used a hole saw you couldn’t cut it loose at the bottom.
capt14k
Posts: 1324
Joined: Sat Jun 27, 2015 8:06 pm
Location: NJ

Re: M27 stock

Post by capt14k »

Robertroadking wrote:Mechanically I can’t figure how you could cut a plug from there, if you used a hole saw you couldn’t cut it loose at the bottom.
Wood plug cutter

Image


Sent from my iPad using Tapatalk
Robertroadking
Posts: 94
Joined: Thu Dec 13, 2018 5:43 pm

Re: M27 stock

Post by Robertroadking »

Yes, those would cut a plug, but you would have to saw the stock in half to free the plug.
capt14k
Posts: 1324
Joined: Sat Jun 27, 2015 8:06 pm
Location: NJ

Re: M27 stock

Post by capt14k »

Robertroadking wrote:Yes, those would cut a plug, but you would have to saw the stock in half to free the plug.
Plugs can be removed with chisel or screwdriver, but tapered wood plug cutter would be better.


Sent from my iPad using Tapatalk
User avatar
SA1911a1
Posts: 5912
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: M27 stock

Post by SA1911a1 »

steelbuttplate wrote:
Robertroadking wrote:The hole is about an inch deep
Isn't that the "butt hole" ? :lol:
We need a like button on this forum. ;)

It that had been my rifle when I was in my 20s that is where I would have been hiding my pot from the sgt.
Aut Pax Aut Bellum
User avatar
millman
Administrator
Administrator
Posts: 6353
Joined: Thu Aug 25, 2011 2:52 pm
Location: KY

Re: M27 stock

Post by millman »

SA1911a1 wrote:
steelbuttplate wrote:
Robertroadking wrote:The hole is about an inch deep
Isn't that the "butt hole" ? :lol:
We need a like button on this forum. ;)

It that had been my rifle when I was in my 20s that is where I would have been hiding my pot from the sgt.
Where do you hide it now?
“Freedom is the right to tell people what they do not want to hear.” George Orwell, English novelist, essayist, and critic, 1903-1950

Of all tyrannies, a tyranny sincerely exercised for the good of its victims may be the most oppressive. It would be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated; but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience.

C. S. Lewis
Post Reply